Chassis and Drawbar

125mm x 50mm Heavy duty welded box section - hot dipped galvanized

Recessed Treg Hitch

Encased in 150mm RHS, TREG 360° hitch with Mechanical Handbrake

Suspension

Independent trailing arm coil spring, 2000 kilogram bearings. Stub axles have 50mm shaft for bearings. Coil Springs, independent suspension with web tie down strap and override bump stops. FOX™ mono-tube Shock Absorbers.

Brakes

Hydraulic Disc Brakes with parking brake. Optional Electronic Disc Brakes

Tyres, Wheels, and Jockey Wheel

16" steel radial-silver spoked ROH rims with generally 275/- x 16 BFG All Terrain Tyres. Wheels and Tyres can generally be matched to towing vehicle as an option ($1250 allowance toward this option). Pneumatic jockey wheel with swing up bracket.

Internal Construction

Alloy

Selecta-Swing-Away™

Chassis has drivers side rear re-inforced channel ready for optional Selecta-Swing-Away™ carriers. These are attached through compression sleeves and have a cam adjustable swing mechanism with saftey catch and stainless securing lock. There are 5 different carrier arm to select from:
Triple Jerry can holder in alloy frame and "Rhino Tuff" lined; Spare Wheel and single Jerry can holder in Galvanised steel; outboard motor carrier in galvanised steel; utility plate with posts of galvanised steel; 50mm receiver welded into central position of galvanised arm so a rear bicycle carrier can be located and interchanged with the rear of vehicle.

Deflecta-Shield™

Front stone deflector is bead-blasted alluminium alloy Front Frame covered with mesh and protective sheath around frame. 610mm x 270mm Heavy Duty Mud Flaps and under chassis hot dipped galvanised stone and gibber deflector. On the side; stainless steel stone protection corner plates.

Water Tank

130 litre Stainless Steel tank with locking filler, electric automatic water pump, drainage outlet. Water Meter inside Gullwing Lid.

Storage Compartment

Lift up bed base with gas struts. Stainless Steel Storage drawer can pull all the way to outside the camper when closed.

Power Pak (12V): Optional

210AH 12V Deep Cycle AGM Sealed Batteries standard. These are maintenance free Advanced Glass Matt.
Additional 12 V outlet socket for refrigerator.
Battery Charger is Intelligent 20A switched mode charger
· 1 x 12 volt interior panel light with switch.
· 1 x 12 volt interior halogen reading light with individual switches.
· 1 x 12 volt outlet sockets (internal/external).

Genuine LED Flexi-Strip™ Lghting

Patented LED Lighting in Kamper Inside Roof and Under Bed . The Lighting has recessed cabling in the camper bows. It consumes only 3 Watts of power.

Amp Hour Energy Capacity Meter

Amp Hour Capacity meter shows voltage, current flow in and out and battery capacity remaining

Body Colour

Metallic silver: 10 coats of paint on body panels -1 coat Super etch/Debeers wash primer, 3 coats Primer Filler, 4 Base coats with acrylic urethane (Two Pack) Color Over Base, 2 coats clear urethane

Rear Door Access

Access to the under bed area from the rear of the closed Kamper. Recessed rear door latches. Optional underbed stainless storage drawer pulls out when camper is closed through the rear access door.

Delta Gullwing Storage Pak ALLOY

Alloy Construction with Galvaised sub-frame glued with poly urethane material and bolted through for fatigue free life.

On Kitchen side:
NEW  Dual Cooker Slide incorporating 2 burner & 1 griller with 14.5Mj WOK burner

73 Litre Autofridge on Stainless Steel Fridge Slide

Patented Filtered ventilation kit for refrigerator with 12V fan and industrial replaceable filters.

High-intensity LED Lighting integrated into the Gullwing Door above the Cooking/Pantry Area

On drivers side:
Incorporating 3 x Jerry with tie down, and an additional storage space.Ventilated storage for outboard or generator and/or porta potti, etc
LED Lighting integrated into the storage area and sealed to be suitable for a flammable area

Stainless Steel Kitchen

"Master" Slide out stainless steel kitchen. stainless steel sink. draining board. cutlery drawer/Storage under for tea towels.
Storage compartments. dining bench/Preparation/Service area.
Kitchen has electric water pump (12V). with second manual water pump/accessible when Camper is closed.
Hot Water at Sink
LED light for task lighting on kitchen area.
Kitchen Drawer has 3 storage areas (apart from cutlery drawer)
· 290mm X 460mm X 140mm Stainless Store.
· 600mm X 500mm X 140mm Expanded Stainless Store.
· 650mm X 80mm X 140mm Stainless Cleaning Material Drawer.

Cooker

2 Burner plus griller cooker - connects to a dedicated 4kg gas bottle with a quick connect fitting.

Wok/BBQ Burner

14.5Mj Wok/BBQ Burner that will take a full size frying pan or wok - connects to a separate 4kg gas bottle with a quick connect fitting.

Fridge/Freezer

73 Litre Autofridge Fridge/Freezer is standard. This uses Eutectic technology to give extend battery life.

Gas Struts

There are a total of 8 gas struts to assist opening and closing Kamper, storage box and raising bed for easy access under it.

Roof

Solid checker plate aluminum roof/hard floor

Body Panels

1.2mm welded Zinc anneal panels.

Roof Rack

Welded box section steel - hot dipped galvanised reinforced to take Boat Loader.

Mattress

NEW Super Queen Size: 200cm X 160cm X 115mm Dual Layer Foam - fabric cover

Canvas Body and Optional Awning and walls

All of the canvas used on the Kamper is pure duck 2 fold yarn warp & weft construction. We use Dynaproofed™ Australian made canvas throughout. This canvas still breathes air even though it is waterproof. The Dynaproofed™ production process ensures the chemical formulation is penetrated into the yarns of the base fabric. This is achieved by fully immersing the fabric into a padding bath and then sqeezing the formulation into the fibres. This system also allows the fabric to "breathe" as the woven base fabric is not sealed by a coating.
Billabong -Finished weight 12 oz.
Roof: Light Sand 15oz. Walls: Khaki Billabong -Finished weight 12 oz
2.4 metre x 6.7m Awning is standard.
Canvas Walls, door and mesh windows to completely enclose the Annex and Camper are standard.

Optional 2m or 2.6m x 6.7m Awning.
LED Lighting in Camper Inside Roof and Under Bed
Optional Tropical Hi-Top Tropical Roof with integrated bow structure for air flow in summer and reduced condensation in winter. The Hi-Top roof stays on the Camper even when closed and is maintenance free.

Weather Dust Seal

Molded rubber EPDM seal.

Recessed Tail Lights

Recessed sealed tail lights to prevent damage.

Pole Carrier

Integrated into Gullwing Storage Pak

Molded Interior

One piece Polyethylene molded interior - dustproof!

Front Accessories

Triple Jerry Can Holder, 2 x 4Kg Gas bottle holder.

Side Storage Box

Two Stainless Steel sealed and lockable storage boxes at frontand rear of camper on kitchen side. 500mm x 190mm x 190mm lockable

Weight

Tare 1050kg dry weight with alloy wheel option. Wet weight with water tank full, Batteries, gas bottle full and canvas awning of 1290kgs Drawbar 150kgs
Mariner Pak increases drawbar weight, though position of boat can reduce the drawbar weight as well.

Dimensions

Overall with Camper open

Overall closed body

Overall body Width including Guards

A-Frame length

Exterior height of closed Camper without boat loader

6.3m

4.35m

1.95m

2.55m

1.4m